Call Us :
0208 813 4000
Email Us :
info@ramki.co.uk
0208 813 4000
Email Us :
info@ramki.co.uk
“Are you ready for
the winter?
Why risk being left
in the cold?
Best time to
service you
boiler is before the
winter months.
“Special offer on
annual service in
August”
the winter?
Why risk being left
in the cold?
Best time to
service you
boiler is before the
winter months.
“Special offer on
annual service in
August”
Installations & Products
CYLINDERS
Most of the cylinders we supply are indirect, which means water from the central heating goes through a coil within the cylinder giving its heat up to the water within the cylinder. These are used for most types of central heating systems.
Copper Vented Cylinders
Vented cylinders are fed by a over head storage tank, and when heated disperses any expansion through a vent pipe.
We have designed and created our own high efficiency cylinder to benefit our customers and our installers. They come with thicker foam lagging bonded on to the outside, which will keep the water hotter for a longer time. They have larger inner coils to improve hot water recovery time and all connections on one side to save space and make it easier to install.
They come in various different shapes and sizes to suit the space available, and the capacity of water that is required.
All our cylinders also come with an electric emersion heater, which is used as a back up to heat the water up if the boiler was to break down.
Unvented Cylinder
A unvented cylinder is connected directly to the main water supply giving mains water pressure to the hot taps and showers. This is probably the future standard because of the reliability and true mains water pressure and when fitted with a low water content boiler are very cheap to run.
Most of the cylinders we supply are indirect, which means water from the central heating goes through a coil within the cylinder giving its heat up to the water within the cylinder. These are used for most types of central heating systems.
Copper Vented Cylinders
Vented cylinders are fed by a over head storage tank, and when heated disperses any expansion through a vent pipe.
We have designed and created our own high efficiency cylinder to benefit our customers and our installers. They come with thicker foam lagging bonded on to the outside, which will keep the water hotter for a longer time. They have larger inner coils to improve hot water recovery time and all connections on one side to save space and make it easier to install.
They come in various different shapes and sizes to suit the space available, and the capacity of water that is required.
All our cylinders also come with an electric emersion heater, which is used as a back up to heat the water up if the boiler was to break down.
Unvented Cylinder
A unvented cylinder is connected directly to the main water supply giving mains water pressure to the hot taps and showers. This is probably the future standard because of the reliability and true mains water pressure and when fitted with a low water content boiler are very cheap to run.
Ours teams work in and around the following areas in:
Central Heating System Repairs and Maintenance |
Water Softeners |
Boiler Service and maintenance |
Corgi Engineer |
Landlord Gas Certificate
top